- Home
- How it works
By applying a simple, yet totally natural water treatment process, the Care-Free Water Conditioner helps neutralise the adverse effects of many of the undesirable substances in your water supply. The Care-Free Water Conditioner is an in-line catalytic water treatment system. It operates by a combination of the following:
Turbulence of the water through a specially designed catalytic chamber; and the creation of a small electrical field around the chamber casing.
This combination causes a separation of the mineral particles in the water, which changes their behaviour.
Particles, which were previously attracted to each other now repel and separate into smaller individual particles. This allows the “separated” mineral particles and salts to flow through the system with minimal interference.
Corrosive gases are released during conditioning and move through the water as harmless bubbles. They are expelled into the atmosphere when water leaves the tap.
To put it simply, the Care-Free Conditioner eliminates the cohesion that exists between the mineral particles in the water. This is clearly seen in the before and after photos.
Electron Microscope Photographs. Mag. x 1400
These photos reveal mineral particles precipitated from “the same water sample” with a reading of 750mg/l hardness. Scientific Analysis has shown that the mineral particle size has reduced from 100-400 microns for untreated water, to around 30 microns for Care-Free treated water. For example, you can compare this reduction in micron size from the size of your fist to the size of your fingernail. Note how the particles are bound together before Care-Free treatment, and “separated” after treatment.