PRODUCT RANGE

It is essential to size the Care-Free Water Conditioner according to flow rate, not pipe size.
Note: A tolerance balance of plus 66% or minus 50% of normal capacity is permissible on MkII threaded units.

Flow rate: 15 lit/min
Thread: 1/2" female
Length: 166mm
Weight: 0.20 kg

Flow rate: 29 lit/min
Thread: 1/2" female
Length: 205mm
Weight: 0.30 kg

Flow rate: 58 lit/min
Thread: 3/4" female
Length: 220mm
Weight: 0.40 kg

Flow rate: 112 lit/min
Thread: 1" female
Length: 270mm
Weight: 0.80 kg

Flow rate: 215 lit/min
Thread: 1 1/4" female
Length: 325mm
Weight: 1.80 kg

Flow rate: 320 lit/min
Thread: 1 1/2" female
Length: 388mm
Weight: 3.10 kg

Flow rate: 480 lit/min
Thread:  2" female
Length: 400mm
Weight: 4.00 kg

Flow rate: 600 lit/min
Thread:  2" female
Length: 400mm
Weight: 4.00 kg

It is essential to size the Care-Free Water Conditioner according to flow rate, not pipe size.
Note: A tolerance balance of plus 66% or minus 50% of normal capacity is permissible on ECO threaded units.

Flow rate: 12 lit/min
Thread: 1/4" female
Length: 160mm
Weight: 0.15 kg

Flow rate: 50 lit/min
Thread: 3/4" male
Length: 192mm
Weight: 0.45 kg

Flow rate: 90 lit/min
Thread: 1" male
Length: 210mm
Weight: 0.55 kg

Flow rate: 165 lit/min
Thread:1 1/4" male
Length: 250mm
Weight: 0.95 kg

Flow rate: 260 lit/min
Thread: 1/2" male
Length: 274mm
Weight: 1.20 kg

Flow rate: 380 lit/min
Thread: 2" male
Length: 297mm
Weight: 1.95 kg

Flow rate: 280 lit/min
Connection: 40/50mm rubber connections
Length: 320mm
Weight: 2.10 kg

Flow rate: 20 lit/min
Connection: Barbed push-in
Length: 144mm
Weight: 0.55 kg

It is essential to size the Care-Free Water Conditioner according to flow rate, not pipe size.
Note: A tolerance balance of plus 66% or minus 50% of normal capacity is permissible on MkII flanged units.

Flow rate with orifice: 800 lit/min
Flow rate without orifice: 1,100 lit/min
Flange: Table E
Length: 360mm
Weight: 9.0 kg

Flow rate with orifice: 1,150 lit/min
Flow rate without orifice: 1,450 lit/min
Flange: Table E
Length: 416mm
Weight: 12.0 kg

Flow rate with orifice: 1,580 lit/min
Flow rate without orifice: 2,000 lit/min
Flange: Table E
Length: 440mm
Weight: 16.0 kg

Flow rate with orifice: 2,400 lit/min
Flow rate without orifice: 3,200 lit/min
Flange: Table E
Length: 500mm
Weight: 30.0 kg

Flow rate with orifice: 3,700 lit/min
Flow rate without orifice: 4,800 lit/min
Flange: Table E
Length: 558mm
Weight: 38.0 kg

Flow rate with orifice: 6,500 lit/min
Flow rate without orifice: 9,400 lit/min
Flange: Table E
Length: 685mm
Weight: 66.0 kg

Flow rate with orifice: 10,500 lit/min
Flow rate without orifice: 15,300 lit/min
Flange: Table E
Length: 720mm
Weight: 102. kg

It is essential to pair each Care-Free Water Conditioner with one of the below earth kits / power supplies.

When installing into a copper or gal pipeline such as a water meter, EK1 can be used.

The magnesium rod will create an electrical current to the conditioner, provided the copper or gal water pipe is located underground.

When installing into a PVC or poly line EK2 can be used.

The magnesium and copper rods act like a small battery and create an electrical current to the conditioner.

The EK3 is preferably used for smaller conditioners only. It is water resistant but not waterproof.

The EK3 is powered by 2 “D" cell batteries and delivers 2mA.

The EK4 can be installed in every application. It is water resistant but not waterproof.
The EK4 requires 240volt power and delivers 40mA.